Special

Anchors Coming Away Cause Fire at Floating Solar Plant in Chiba (page 2)

2019/11/19 19:29
Kenji Kaneko & Shinichi Kato, Nikkei BP Intelligence Group, CleanTech Labo
Print Page

Anchors coming away caused accident

According to the report on the damage situation, the large island was divided into three parts. The rectangular portion on the western side, which extends to the south, and several rows on the southern end of the eastern side remained in their original positions, but the remaining part on the northern side broke away and pushed toward the northern shore.

In the process of separation and drifting of the island, the floats on the southern end, which were broken and separated, rolled up, while some of the floats at the center of the northern part (inner part of the island), which were pushed away by winds, were pushed by floats behind them and overlapped, causing significant bulging. Floats on the northern end were pushed to the shore and pulled down from the surface toward the pond bottom by the anchors (Fig. 6).

Fig. 6: Outline of the accident and situation of the damage. The island was broken into three parts, separating at places indicated by yellow dotted lines. (source: Kyocera TCL Solar)

According to the investigation of the pond bottom after the accident, seven anchors at the center of the southern end, among 68 anchors on the southern end, had come away from the bottom. Because of the "removal" of the anchors, the investigation deduced that mooring wires at the center of the southern end lost their function and the wind load applied to the western side and eastern side of the southern end increased, damaging and breaking connecting pins used to link the floating mounting systems, resulting in the entire northern area of the island separating from the southern area and the northern area drifting further north (Fig. 7).

Fig. 7: Estimated cause of breakage of island and damage flow (source: Kyocera TCL Solar)

Resin floats eventually burned

Why did the anchors come away, resulting in damage to and separation of the island? According to the cause analysis in the report, the possibilities are: (1) The wind speed on the day possibly exceeded the design wind speed (41.53m/s), (2) The island was swung by winds and waves, generating unbalanced loads, (3) Loads exceeding the design load were applied to pins and joints because of the size of the island or (4) Stress was concentrated because of the shape of the island.

As for the fire, the parts that were actually burnt were in the water. They were pulled out of the water to investigate the cause; the investigation is still in progress, but the company believes that cables were ignited by DC leakage or sparks, eventually resulting in the fire spreading to resin floats.

Kyocera TCL Solar plans to submit the final report in February 2020 and work out recurrence prevention measures in March (Fig. 8).

Fig. 8: Investigation schedule for cause of accident (source: Kyocera TCL Solar)

At a meeting separate from the meeting of the WG, Toshihide Koyano, assistant director of the solar energy business headquarters at Kyocera Corp, said that the Chiba Yamakura Floating Mega Solar Power Plant will be repaired "in six months to one year." He said, "If it is determined that the problems identified by the future investigation cannot be solved without changing the initial design, a new design will be incorporated for the repair work."

Assistant director Koyano also said, "It is important to eliminate the concerns of the nearby residents about safety by repairing the facility so that an accident like this never occurs again."